9 Carpet Installation Tools Necessary for the Ease of Installation

May 4, 2019

630

If you have carpet Installation Tools, then it is fine. However, if you do not have tools, buy them and make the work easier. It will lessen the whole cost if you do it on your own. You should know How to fit carpet. Having the right carpet layers tools at the right time is very satisfying.

Necessary Carpet Installation Tools

Following are the tools you will need to install a carpet;

1. Carpet Tape:

Carpet Tape Necessary Carpet Installation Tools — Image by: Pixabay

So we kick off our list with the most basic carpet installation tool; the Carpet Tape. There are different types of carpet tapes, each with its special purpose. A double-sided carpet installation tape is useful to keep carpets in place. While another type is good for binding the raw edges of a carpet.

Pros

It is best for cleaner joints in the carpeting.
It is relatively very easy to affix.
It is not messy like other forms of adhesives.

Cons

It is not as strong at bonding as other adhesives.
Sometimes dirt sticks to the adhesive surface of the tape, leaving it useless.

2. Carpet Trimmer:

A carpet trimmer is often a multi-purpose tool that is useful for cutting carpets. Primarily the carpet trimmers are useful for trimming the carpet endings at hard to reach places. You can also easily cut the carpet at the toe kicks using this tool.

Pros

The handle on the carpet trimmer is easier to grab and will not slip.
Its design is suitable to operate in tight areas.
Not only does it cut carpets, but also other soft sheets such as vinyl and carpet tiles.

Cons

It is a complicated tool to use.
The user needs a certain level of skill to operate this device.

3. Linoleum Knife:

A linoleum (knife aka hook ax) is a short carpet knife that has a small, stiffed blade with a bent point. You can use it to cut sheet materials. A linoleum knife makes the work easier. A linoleum knife is more manageable than other carpet cutters.

Pros

You can cut a carpet efficiently using a linoleum knife. You can also use it to tuck in the carpet if you are doing the staircase.

Cons

You can hurt yourself because of the blade. Use it carefully, so you do not end up hurting yourself.

4. Carpet Seam Roller:

When joining two pieces of a carpet together, the seam between them should be as thin as possible. A carpet seam roller comes in handy at times like these. It is a small hand-held tool with star-shaped toothed wheels. The user needs this tool to apply pressure to both sides of the seam so it can join smoothly.

Pros

It is a perfect tool to hide the seams.
The toothed-wheels help the carpet and the adhesive to bond together strongly.
It blends the carpet edges together for a smoother surface.

Cons

The wheels are sharp and can hurt you if not used properly.
It needs some level of expertise to align the carpet properly for best result.

5. Carpet Power Stretcher:

Carpet power stretcher, as the name suggests, is a special purpose tool used to stretch carpets for wall installations. The device has a set of tines on ahead to grip the carpet, and a lever to pull (or stretch) the carpet closer to the wall.

Pros

It is a handy tool when covering the whole floor with carpets.
Using the tool is simple.
Power stretchers are beneficial for larger rooms.

Cons

You need to apply a strong force to stretch the carpet. Which can be very tiring.

6. Carpet Knee Kicker:

The carpet knee kickers are more straightforward than the power stretchers. It has a knee-kicking pad and tines on ahead. You kick the back of the tool to apply tension and stretch the carpet.

Pros

It is a plain and easy to use tool.
This tool is beneficial for small spaces like stairs and closets.

Cons

The kicks can leave bruises on the knees of amateur users.
It is very exhausting to use this tool.
The carpet will wrinkle over time if not used properly.

7. Carpet Gripper:

A carpet gripper goes by many names such as gripper rod, tack strip, smooth edge, and gripper edge. You will need this tool to fit the carpet to the wall after stretching it across the room. It is a wooden or a metallic strip of one to two meters, studded with hundreds of nails. Metal carpet gripper is more common these days as compared to wooden ones.

Pros

This is a very basic tool.
It is relatively easy to install.

Cons

The several nails on the tool can easily cause harm.
There is always a chance of termite infestation when using wooden carpet grippers.
And a chance of rusting on metal carpet grippers.

8. Carpet Tucker:

A carpet tucker is an easy-to-use and simple tool. It is an essential tool while fitting carpets. You will need it to tuck the carpet into the tack strips after stretching the carpet and to for finishing the carpeting process.

Pros

Basic tool.
Ideal for fitting around ceramic tiles as it will not break them.
It will not leave marks on the carpet.

Cons

Some carpet tuckers are very sharp and cause harm.
Can cut the carpet if you apply strong force.

9. Heat Bond Iron:

It is another example of amazing carpet installation tools. This tool is very useful in joining two pieces of carpet together quickly and effectively. The use of heat bond iron is accompanied by the heat bond tape. The process is simple you put both pieces of carpet on the iron and then move the iron on wooden rails. The heat from the iron melts the heat bond tape and creates a strong adhesive bond.

Pros

It makes carpet seaming a very easy process.
The heat bond iron is good for joining carpets in more prominent areas to hide the seam.

Cons

The tool can burn you.
A cheap iron ca also burn or damage the carpet.
Not practical for a longer seam.

* Conclusion:

You can save much money by installing carpets yourselves at home. These carpet installation tools are the necessary items that you will need to complete your Carpet fitting kit. You can learn more about how to lay carpets in your home by reading this guide.